HowTune

1991 Ford Econoline Recalls

  1. Recall Description

    THE REAR SHOCK CROSSMEMBER OF THE FRAME CAN CRACK AND SEPARATE FROM THE FRAME.

    Possible Effects

    SEPARATION OF THE REAR SHOCK CROSSMEMBER FROM THE FRAMECAN RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

    Action

    REPLACE THE REAR CHOCK CROSSMEMBER WITH A SHOCK CROSSMEMBER MADE OF HIGH STRENGTH STEEL.

    Notes

    SYSTEM: SUSPENSION.VEHICLE DESCRIPTION: VANS; MODEL E250 ECONOLINE.

    Recall Manufacture Dates

    1989-07-01 - 1991-08-01

    Vehicles Affected

    25000

  2. Recall Description

    THE DUAL FUEL TANK SELECTOR VALVE MAY MALFUNCTION AND CAUSE AN OVERFILL CONDITION IN ONE OF THE FUEL TANKS, RESULTING IN AN OVERFLOW OF FUEL PAST THE FILLER CAP.

    Possible Effects

    THE OVERFLOW OF FUEL PAST THE FILLER CAP CAUSES A FUELLEAKAGE, WHICH CAN RESULT IN A FIRE WHEN EXPOSED TO A SOURCE OF IGNITION.

    Action

    REPLACE THE DUAL FUEL TANK SELECTOR VALVE.

    Notes

    SYSTEM: FUEL TANK, AUXILLIARY.VEHICLE DESCRIPTION: VANS AND LIGHT TRUCKS WITH DUAL FUEL TANKS PRODUCED IN THEFOLLOWING PERIODS: F150, F250, AND F350 LIGHT TRUCKS BUILT BETWEEN FEBRUARY 28,1989 AND JULY, 1989; ECONOLINE BUILT BETWEEN FEBRUARY 28, 1989 ANDFEBRUARY 11, 1991.NOTE: FORD HAS AGREED TO RECALL THESE VEHICLES BUT PARTS ARE NOT YET AVAILABLE.PARTS WILL BE AVAILABLE IN DECEMBER 1991. YOU WILL RECEIVE A LETTER FROM FORDADVISING YOU WHEN TO SCHEDULE AN APPOINTMENT WITH YOUR DEALER TO HAVE THE RECALLWORK PERFORMED. IN THE MEAN TIME, YOU CAN TAKE THE FOLLOWING PRECAUTIONS:FILL EACH TANK TO ONLY 1/3 FULL.IF YOUR VEHICLE LEAKS FUEL OR IF YOU SMELL FUEL, STOP USING THE VEHICLE ANDCALL FORD AT (313) 446-4654 AND ADVISE THEM OF YOUR PROBLEM. REFER TO FORDSAFETY RECALL NUMBER 91S39. AN OPERATOR WILL TAKE YOUR NAME AND TELEPHONENUMBER. A FORD REPRESENTATIVE WILL CALL YOU BACK.

    Recall Manufacture Dates

    1989-02-01 - 1991-02-01

    Vehicles Affected

    350000

  3. Recall Description

    THE SAFETY BELT ANCHORAGE FOR THE REAR BENCH SEAT FAILED TO COMPLY WITH THE STANDARDS OF FMVSS 210.

    Possible Effects

    FAILURE TO MEET THE LOAD REQUIREMENTS OF FMVSS 210 PLACETHE SEAT OCCUPANTS IN INCREASED RISK OF INJURY IN THE EVENT OF A SUDDEN STOPOR ACCIDENT.

    Action

    THE MANUFACTURE WILL REPLACE THE NON-COMPLYING SAFETY BELT ANCHORAGE WITH A NEW ANCHORAGE THAT MEETS THE REQUIREMENTS OF FMVSS 210.

    Notes

    SYSTEM: REAR BENCH SEAT: SAFETY BELT ANCHORAGE, FMVSS 210.VEHICLE DESCRIPTION: FULL SIZED VAN (ECONOLINE) CONVERSIONS.NOTE: THIS RECALL IS BEING CONDUCTED BY GLAVAL CORPORATION;29340 LEXINGTON PARK DRIVE; ELKHART, INDIANA46515.

    Recall Manufacture Dates

    1990-10-01 - 1991-03-01

    Vehicles Affected

    1010

All econoline Recalls

Other Ford Recalls