HowTune

Install The I Jdmtoy Led Light Bar on a Jeep Wrangler

This article is visible to only you.
Edit Publish

The Jeep Wrangler is perhaps one of the most versatile vehicles on the road today; many people use their Jeep Wranglers as a daily driver and off the road on uncharted terrain. Because of the many uses a Jeep Wrangler has, the owners know that having adequate lighting is essential because drivers need to see what's on the street during nighttime driving as well as know what's out there when driving in the mountains. Fortunately, this iJDMTOY Jeep Wrangler LED Light Bar gives the Wrangler more than adequate lighting capabilities to give riders peace of mind.

Required Parts
Step by Step Instructions

First, determine if you will be mounting your LED light bar on the bottom or top of the Jeep grille. if you choose the lower mount, the brackets need to point downwards. If you choose upper mount, brackets will point upwards.

Image 7226 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7227 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
1

You need to reach to the two side bar opening in order to mount the brackets. It's not required to remove the front grille, but it will definitely help with the installation process. Remove the plastic fasteners inside of the grille. The process is the same on both sides.

Image 7228 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7229 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7230 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7231 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
2

Time to mount the brackets. Pull out the slat where you'll be mounting the brackets and secure the brackets in place using the larger holes. Then bolt the brackets to the frame where the plastic piece was before. Make sure the bracket is bent inward towards the center of the Jeep Wrangler.

Image 7232 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7233 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7234 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
3

Put the plastic cover fasteners back in place. Clip it onto the smaller holes on the bracket that you just installed. Repeat on the other side.

Image 7237 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
4

Install the LED light bar in between the brackets. Bolt everything together.

Image 7235 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Image 7236 from Install the iJDMTOY LED Light Bar on a Jeep Wrangler
Conclusion & Wrap Up

As you can see, the installation process is very straightforward and easy to follow. You will be lighting up the road with your iJDMTOY Jeep Wrangler LED Light System in no time!

Source

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

ijdmtoy
61 Articles

Related Articles