HowTune

Install The Chrome Hood Latch Pins on a Dodge Challenger

This article is visible to only you.

Edit Publish

This guide will show you how to install the chrome classic style 2.5" hood latch pin kit. While we will be demonstrating the installation process on a Dodge Challenger, this is a universally fit product that will fit any car, truck, or SUV. We recommend having the classic hood latch pin kit professionally installed, but if you feel confident in yourself, these steps will guide you through the installation.

Keep in mind that this will require you to drill holes into your hood.

Low Beam Headlight Bulb: BRAND & PART NUMBER
High Beam Headlight Bulb: BRAND & PART NUMBER

Step by Step Instructions

Install the latch pins on both sides of your engine bay frame.

Image 7972 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Image 7973 from Install the Chrome Hood Latch Pins on a Dodge Challenger

To prevent falling shrapnel from getting into the nooks and cranny of your engine bay, cover it with a blanket or a big cloth.

Image 7974 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Mark the drilling points under your hood.

Drill holes through your marks from the bottom side of your hood.

Image 7975 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Image 7976 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Drill holes through the top end of your hood. You can cover your drilling areas with tape to protect the paint job.

Image 7977 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Apply the scuff plates over the holes and close your hood to finish.

Image 7978 from Install the Chrome Hood Latch Pins on a Dodge Challenger

Conclusion & Wrap Up

You can now enjoy the classic racer look the chrome hood latch pins give as well as the hood security. Find this and more accessories at iJDMTOY.com!

There are 0 Comments.