1975 Plymouth B300 Recalls

1. Recall Description

   THE FRONT RAIL EXTENSION MAY EXPERIENCE FATIGUE CRACKING NEAR THE AREA WHERE THE POWER STEERING GEAR ATTACHES TO THE FRAME. IF THE CRACK PROGRESSES THROUGH MOST OR ALL OF THE RAIL SECTION, STEERING SYSTEM FREE PLAY ACCOMPANIED BY METALLIC RATTLE NOISE WILL BE EXPERIENCED.

   Possible Effects

   Action

   AFFECTED VEHICLES WILL BE WELD REPAIRED AND A REINFORCEMENT ROD WILL BE INSTALLED OVER THE CRACKED AREA.

   Notes

   VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: STRUCTURE; LEFT FRONT FRAME RAIL.CONSEQUENCES OF DEFECT: THE CRACK CONDITION MAY CAUSE A COMPLETE LOSS OFSTEERING AND AN ACCIDENT.

   Recall Manufacture Dates

   1970-03-01 - 1978-08-01

   Vehicles Affected

   1000000

2. Recall Description

   DUE TO A COMBINATION OF DISC BRAKE PAD WEAR AND TURN STOP WEAR ON CERTAIN VEHICLES, THERE MAY BE AN INCREASE IN BRAKE PEDAL TRAVEL AND A REDUCTION IN FRONT BRAKING EFFECTIVENESS FOLLOWING A FULL TURN. ALSO, A FRAME CRACK COULD DEVELOP AND COULD EXTEND THROUGH ALL OR MOST OF THE RAIL SECTION.

   Possible Effects

   Action

   UPON INSPECTION DEALER WILL REPLACE EITHER THE LEFT OR RIGHT TURN STOP BRACKET TO CORRECT THE FRONT BRAKES. IF FRAME IS CRACKED IT WILL BE WELDED AND A ROD REINFORCEMENT WILL BE INSTALLED OVER THE CRACKED AREA.

   Notes

   VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: SERVICE BRAKES; FRONT WHEEL DISC BRAKES, STRUCTURE; FRONT FRAME RAILEXTENSION.CONSEQUENCES OF DEFECT: THE REDUCTION IN FRONT WHEEL BRAKING EFFECTIVENESSCOULD RESULT IN A VEHICLE ACCIDENT IN SITUATIONS WHICH REQUIRE MINIMUM STOPPINGDISTANCE. IF AN EXTENSIVE CRACK DEVELOPS IN THE FRAME RAIL, INCREASED STEERINGSYSTEM PLAY AND DIFFICULTY IN HANDLING OF VEHICLE COULD ALSO LEAD TO ANACCIDENT.NOTE: A CRACK IN THE FRAME MAY BE ACCOMPANIED BY A METALLIC RATTLING NOISE ASTHE TWO EDGES SCRAPE AGAINST EACH OTHER.

   Recall Manufacture Dates

   1972-07-01 - 1977-01-01

   Vehicles Affected

   350000