HowTune

Install The Fog Lamp Led Daytime Running Lights on a Ford Focus

This article is visible to only you.
Edit Publish

Looks like the Ford Focus is becoming more and more popular among car owners so the aftermarket upgrades for this vehicle have naturally exploded as well. This guide demonstrates how to install the fog lamps bezel LED daytime running lights on your new Ford Focus. Just because the Ford Focus is extremely popular, doesn't mean you don't have a chance to stand out!

Required Tools
  • pry tool
Step by Step Instructions
1

Use a pry tool to remove the stock fog lamp bezel.

Image 4401 from Install the Fog Lamp LED Daytime Running Lights on a Ford Focus
2

Replace back with the new LED daytime running light bezel rings.

Image 4404 from Install the Fog Lamp LED Daytime Running Lights on a Ford Focus
3

Route the wires up to the engine bay and connect the wires.

black wire to ground, Red wire to ACC 12V+ (ACC is in the #25 fuse location), optional white wire to headlight + to turn off DRL, two yellow wires to turn signal + for switchback turn signal feature

Image 4407 from Install the Fog Lamp LED Daytime Running Lights on a Ford Focus
4

Test to make sure everything works and enjoy your new fog lamp LED daytime running lights.

Image 4410 from Install the Fog Lamp LED Daytime Running Lights on a Ford Focus
Conclusion

Based on the simplicity of this entire installation, it looks like you're well on your way to upgrading your Ford Focus to a new set fog lamp LED daytime running lights.

Source

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

ijdmtoy
61 Articles

Related Articles