Install The Led Turn Signal Light on a Audi A4
Error free LED PWY24W bulbs for turn signal bulbs are a great choice for people with European vehicles who don't want to deal with any error messages on the dashboard. The LED bulb is plug-and-play so there's no modification needed. This installation is great for beginners who want a bit of a newer look for their car and want to get rid of that "fried egg" look. The new LED turn signal bulbs also have a faster response time and brighter shine.
Open the hood. You will see the moisture cap cover behind the headlamp. Pull the cap open to expose the stock bulb.
Replace the factory PW24W bulb from the socket with the new LED turn signal bulb. Make sure the grooves around the bulb matches up with the socket.
Put back the cap cover and check to see if the LED turn signal light turns on. Put everything back and enjoy your new LED turn signal bulbs.
Enjoy your new LED turn signal lights!
There are 0 Comments.
Say Something.You have to log in to comment...
We'll publish your comment after you're logged in.
Written by:ijdmtoy
Related HowTune Articles
Written by:mercnet
Replacing the PCV Valve
Written by:Ten Six Garage
Installing the PAC iSimple Connect ISGM655
Written by:iturgeon
Change the Cabin Air Filter
Written by:zachberry
Upgrade the Radio With Modifry Dash Controls
Written by:ijdmtoy
Install LED Daytime Running Lights/turn Signal Lamps
Get notified about new articles.
We don't sell or share your info.