How To Install The Led Knight Rider Light Kit on a Honda
What's a great way to add tons of flair to your car without having to break the bank? A LED Knight Rider Lighting Kit gives you all of the looks when you want and easily tucks away from view when it's not in use. This installation guide shows you where you attach the LED strips and how to mount the wires. If you're a fan of the TV show or the Hoff, you will definitely enjoy this.
- zip ties
Mount the LED knight rider scanner bar to the center grill with zip-ties. We recommend zip-ties for long lasting application, since the zip-ties are a semi-permanent way to secure the LED strip. If you want to remove the strip in the future, you can always cut the zip-ties.
We recommend that you secure every 12 inches of the LED strip with zip-ties. It helps to have a friend to help you hold the LED strip in place when you secure the zip-ties to the grille.
Route the LED strip wires to the engine bay towards the battery.
Connect the black wire to the ground and the red wire to battery positive. If you want the LED scanner to work when the engine starts, you can connect the red wire to fuse box ACC.
If there are any other wires, you can check the instruction guide included for its purpose.
Secure the module box by placing it close to the battery, but away from the engine or radiator. This is so there is no risk of heat damage. The module box must stay perfectly dry at all times so placing it near the battery/fuse box will guarantee that.
Test to make sure everything works and enjoy your new LED Knight Rider Strip Lights!