HowTune

Install The I Jdmtoy Tow Hook License Plate Mount on a Subaru WRX

This article is visible to only you.
Edit Publish

The Suburu WRX has always been an iconic car in the rallying world with many having front mounted intercoolers. Many people want to maximize air flow to their intercoolers so they remove their front license plate completely or the drill new holes in the bumper. In many states removing the front license plate is illegal and many people do not want to drill new holes in their bumper. Luckily here at iJDMTOY, we have come up with a No Drill License Plate Bracket so that the license plate won’t block airflow and still keep the vehicle street legal utilizing the cars tow hole. We also provide these Tow Hook Front Mounting Bracket for many other vehicles as well.

Required Tools
  • Flat Head Screw Driver
  • Wrench
  • Plastic Pryer
Required Parts
Step by Step Instructions
1

Use a plastic pryer to pry open the tow hook cover as shown here.

Image 6793 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
2

Carefully take off the cover and put to the side as you will not be needing this anymore.

Image 6794 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6795 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
3

Take the iJDMTOY tow hook license plate bar and screw it in tightly to the tow hole.

Image 6796 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6797 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
4

Take the tow hook license plate mount and screw it into the tow bar using the included hardware to secure the bracket plate on tightly.

Image 6798 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6799 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6800 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
5

Put your license plate on the new tow hook license plate holder and secure it in with a wrench and a screw driver.

Image 6801 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6802 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6803 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Image 6804 from Install the iJDMTOY Tow Hook License Plate Mount on a Subaru WRX
Conclusion & Wrap Up

This method of relocating your license plate to the side requires no drilling and looks great on the Suburu WRX. Not only do we have this tow hook no holes license plate mount for the Subaru WRX but we also tow hook license plate adapters for plenty of other cars and you too can have this new look on your vehicle.

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

ijdmtoy
61 Articles

Related Articles