HowTune

Replace The Battery on a 2012-2017 Toyota Avalon

This article is visible to only you.
Edit Publish

The battery on the Toyota Avalon is easy to access and replace. If you're looking to replace or upgrade your battery, our guide will show you what's involved, what parts, and what tools you'll need.

Required Tools
  • 10mm wrench or socket
Required Parts
Step by Step Instructions

Open the Hood

1

Pop the hood using the lever under the dash.

Just like all other cars, there is a secondary latch at the front center of the hood. You need to press the lever to the side, and open the hood.

Image 7298 from Replace the Battery on a 2012-2017 Toyota Avalon
2

Locate the battery at the front right of the engine bay.

Remove the Battery

3

Disconnect the negative battery cable first. Read why here.

In our case, the negative is on the right side of the battery.

4

Using a 10mm socket, loosen the small nut on the negative post and disconnect it from the battery.

5

Then using the same 10mm wrench, remove the positive cables.

6

Now Remove the battery tie down strap by removing the 2 x 10mm nuts.

7

Now remove the battery from the engine bay. Keep in mind that batteries are super heavy.

Install a new Battery

8

Drop a new battery in.

9

Install the battery hold down strap.

10

Install the positive terminal cable.

11

Install the negative terminal cable.

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

iturgeon
167 Articles

Related Articles