How To Install The Led Bumper Reflectors on a Lexus IS
If you want to get a new look for the rear bumper of your 2014-up Lexus IS, then these new LED bumper reflectors are one of the best ways to go about it. These iJDMTOY Lexus IS LED bumper reflector lights were designed to have the same linear theme as the OEM Lexus IS taillights, giving you a fluid, matching look. The installation process is not complicated since you will just be replacing the original stock bumper reflectors with the all new LED bumper reflector lights without any modification.
Remove the rear bumper. There are some clips you need to remove in order to take off the bumper. If you're not sure where the clips are located, check the forums for people who have removed their bumper already.
You now have access to a 10mm bolt after you remove the rear bumper. Remove the bolt so you can remove the stock bumper reflector.
Remove the stock bumper reflector as well as the stock taillight.
Extend the wires to where the LED bumper reflector is located.
Test the bumper reflector LED lights before you put them back. This is to make sure that all three functions (taillights, parking lights, and turn signal lights) work properly.
Put the new LED bumper reflector lights back the same way you removed the stock reflectors. Test the LED lights again.
You can see from the photos that the installation is pretty straightforward. The Lexus IS bumper reflector LED lights really make your 2014-up Lexus IS unique on the road. The three functions of the new LED reflectors really step it up a notch too.