Install The I Jdmtoy Led Light Bar on a 2014-up Toyota Tundra
Owners of the Toyota Tundra know that there's plenty of options to mount an LED light bar system onto the truck. This installation guide shows you how to mount the iJDMTOY Toyota Tundra LED light bar. Most LED light bars are on the lower bumper location, but this Tundra LED light bar kit is unique because you install it behind the grille, so it's super discreet but still powerful when it's turned on.
First, remove the front grill. Remove all the bolts that are circled.
Find this bolt right here. Remove this bolt and the bolt on the other side as well.
Insert the brackets on both sides of the grill and securely bolt them into place.
Insert the LED light bar through the brackets and position the bar on the bottom hole. Secure the LED light on both sides and make sure there is a bolt on either side of the brackets to make sure htat the LED light bar is secured and will not move.
Now, make the support bracket for the center of the LED light bar. Grab the longer L-shaped bracket and the smaller L- bracket and secure them both together with a screw and washer.
Insert the support bracket in the center of the LED light bar and then bolt down the bracket to the trucks frame. This prevents the LED light bar from flexing due to its longer length.
As you can see, installing this iJDMTOY LED Truck Light is super straight forward and requires no modifications to your truck. It makes your truck look great and adds a super functional work light/off road light.