HowTune

Install The I Jdmtoy Led Clearance Lights on a Toyota Tundra

This article is visible to only you.
Edit Publish

A few days ago, one of our customers came in with a Toyota Tundra and we replaced the OEM high mount clearance lights with our iJDMTOY Toyota Tundra LED Clearance Light. All you need is a Phillips head screw driver and a few minutes to enjoy a new brighter high mount marker light's for your vehicle as well.

Required Tools
  • Phillips Head Screw Driver
Required Parts
Step by Step Instructions
1

Unscrew the plastic covering on the Toyota Tundra's high mount clearance lights.

Image 6780 from Install the iJDMTOY LED Clearance Lights on a Toyota Tundra
2

Locate the OEM halogen bulbs and carefully replace it with the iJDMTOY LED Bulbs. Only replace the outer two halogen bulbs because the middle light is covered with a red light filter and a replacement LED is not necessary.

3

Make sure that the LED clearance lights are working properly before putting the plastic cover back into place.

Image 6782 from Install the iJDMTOY LED Clearance Lights on a Toyota Tundra
4

Put the Toyota Tundra's high clearance plastic cover back into place and screw back in tightly.

Image 6783 from Install the iJDMTOY LED Clearance Lights on a Toyota Tundra
Image 6784 from Install the iJDMTOY LED Clearance Lights on a Toyota Tundra
Conclusion & Wrap Up

As you can see, with a few simple steps and only a Phillips head screw driver, you too can enjoy the new Toyota Tundra high mount LED light. Not only will this make the lights more aesthetically pleasing, but it also adds visibility to the truck for additional safety.

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

ijdmtoy
61 Articles

Related Articles