HowTune

Install The Sr Mini 10 W Led Pod Light on a Toyota Tundra

This article is visible to only you.
Edit Publish

This installation guide will show you how to assemble the SR-MINI 10W high powered CREE LED pod lights with the included metal mounting bracket, made to fit most Toyota and Lexus models that come equipped with factory fog lights. The included metal mounting bracket fits into the fog bezel the same way as the stock fog lights, which allows you to easily mount the SR-MINI LED pod lights onto your bumper or bezel cover. The pictures of this guide will use the 2014 Toyota Tundra as an example to mount the SR-MINI LED pod lights.

Required Tools
  • screwdriver
Step by Step Instructions
1

Disassemble the factory fog lamp from the bumper. Unscrew the bolt(s) to take the stock fog light off the stock bezel.

Image 7634 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Image 7635 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
2

Slide in the metal mounting bracket into the slots by the two prongs. Secure the support bracket with a bolt through the hole on the other side of the bracket. Adjust as you please.

Image 7636 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Image 7637 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Image 7638 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
3

Preassemble the SR-MINI LED pod light. Route the shorter bolt through the U-shaped bracket as you see in the picture.

Image 7639 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra

Insert the U-bracket to align with the holes and run the longer bolt through. Secure with a nut.

Image 7640 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
4

Mount the SR-MINI LED pod lamp onto the metal bracket. Run the bolt through the center opening of the mounting bracket and secure the connection with a washer and nut to complete the assembly.

Image 7641 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Image 7642 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Image 7643 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra

If the SR-MINI LED pod light doesn't align in the middle with the bezel opening, try rotating the pod lamp 180 degrees. You can also adjust the screw in the back to move the SR-MINI LED pod lamp horizontally. Repeat steps 1-4 on the other side.

Image 7644 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
5

Connect the wires to the existing fog light harness. Test to make sure it lights up. Once it does, rescrew or reclip parts you have disassembled such as the wheel well. You can now enjoy your Toyota's new SR-MINI LED pod lights!

Image 7645 from Install the SR-MINI 10W LED Pod Light on a Toyota Tundra
Conclusion & Wrap Up

You can shop for more universally fit off-road truck LED lighting at store.ijdmtoy.com today!

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

 Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.

ijdmtoy
61 Articles

Related Articles