HowTune

1977 Chevrolet C30 Recalls

  1. Recall Description

    ON THE INVOLVED VEHICLES, THE NUTS WHICH ATTACH THE BRAKE MASTER CYLINDER TO THE HYDRO-BOOST UNIT MAY HAVE BEEN OVER-TIGHTENED. THIS COULD HAVE CAUSED STRIPPED THREADS AND CRACKED ATTACHING FLANGES. SHOULD THESE NUTS FAIL, THE PARTS MAY SEPARATE AND LOSS OF SERVICE BRAKES WOULD RESULT.

    Possible Effects

    Action

    DEALER WILL INSPECT FOR CRACKS IN THE ATTACHING FLANGES; UNITS WITH CRACKS PRESENT WILL BE REPLACED. IF NO CRACKS ARE FOUND, THE STUDS WILL BE REMOVED AND THE HOLES DRILLED OUT. THE UNIT WILL BE REASSEMBLED USING BOLTS AND NUTS IN PLACE OF THE EXISTING STUDS.

    Notes

    VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: SERVICE BRAKES; MASTER CYLINDER TO HYDRO-BOOST UNIT ATTACHING NUTS.CONSEQUENCES OF DEFECT: LOSS OF BRAKING CAPABILITY COULD OCCUR WITHOUT PRIORWARNING AND COULD CAUSE LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

    Recall Manufacture Dates

    -

    Vehicles Affected

    1232
  2. Recall Description

    THE ACCELERATOR PEDAL ROD IN COMBINATION WITH THE PEDAL INSTALLED ON THE INVOLVED VEHICLES MAY CUT THROUGH THE FLOOR PAN RUBBER MAT OR CARPET INTO THE THICK RESILIENT INSULATION PAD UNDERNEATH DURING HEAVY OR REPEATED FULL THROTTLE APPLICATIONS. AS A RESULT, THE ACCELERATOR PEDAL ROD MAY CATCH IN THE MAT OR CARPET, PREVENTING THE THROTTLE FROM RETURNING TO IDLE WHEN THE DRIVER"S FOOT IS REMOVED FROM THE PEDAL.

    Possible Effects

    Action

    DEALER WILL INSTALL A NEW ACCELERATOR PEDAL AND RETAINER DESIGNED TO PREVENT THE ACCELERATOR PEDAL ROD FROM CUTTING THE RUBBER MAT OR CARPET. THIS WILL BE PERFORMED WITHOUT CHARGE.

    Notes

    VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: THROTTLE LINKAGES AND CONTROL; ACCELERATOR PEDAL ROD.CONSEQUENCES OF DEFECT: IN THE EVENT THAT THE THROTTLE DOES NOT RETURN TO IDLE,THE VEHICLE WOULD NOT DECELERATE AS EXPECTED AND LOSS OF VEHICLE CONTROL AND ANACCIDENT COULD RESULT.

    Recall Manufacture Dates

    -

    Vehicles Affected

    330468
  3. Recall Description

    CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

    Possible Effects

    THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.

    Action

    HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.

    Notes

    CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION''S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

    Recall Manufacture Dates

    -

    Vehicles Affected

    121680

All c30 Recalls

Other Chevrolet Recalls