1988 Mitsubishi Precis Recalls

1. Recall Description

   VEHICLES INVOLVED ARE THOSE THAT HAD THE HEATER VALVE STEMS REPLACED IN AN EARLIER MITSUBISHI RECALL (94V-103.001). CERTAIN VEHICLES HAD AN INCORRECT VALVE STEM INSTALLED WHICH COULD CAUSE THE INCORRECT STEM TO LEAK AFTER A PERIOD OF TIME.

   Possible Effects

   THIS CAN RESULT IN A BURN INJURY TO THE FRONT SEAT PASSENGER''S FEET AND LEGS.

   Action

   DEALERS WILL INSPECT AND REPLACE INCORRECT VALVE STEMS.

   Notes

   SYSTEM: HEATER; WATER; DEFROSTER; HEATER CORE.VEHICLE DESCRIPTION: PASSENGER CARS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, PLEASE CONTACT MITSUBISHI AT 1-800-222-0037. ALSO CONTACT THE NATIONALHIGHWAY TRAFFIC SAFETY ADMINISTRATION''S AUTO SAFETY HOTLINE AT 1-800-424-9393.

   Recall Manufacture Dates

   1988-04-01 - 1989-04-01

   Vehicles Affected

   1906

2. Recall Description

   THE HEATER CONTROL VALVE STEM DOES NOT MEET THE MATERIAL SPECIFICATIONS. HIGH COOLANT TEMPERATURES CAN CAUSE THE STEM TO LEAK.

   Possible Effects

   THIS CAN RESULT IN A BURN INJURY TO THE FRONT SEAT PASSENGER''S FEET AND LEGS.

   Action

   DEALERS WILL INSPECT AND REPLACE DEFECTIVE VALVE STEMS.

   Notes

   SYSTEM: HEATER, WATER, DEFROSTER, HEATER CORE.VEHICLE DESCRIPTION: PASSENGER CARS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME OR THE REMEDY DOES NOT CORRECT THE DEFECT, PLEASE CONTACT MITSUBISHI AT 1-800-222-0037. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION''S AUTO SAFETY HOTLINE AT 1-800-424-9393.

   Recall Manufacture Dates

   1988-04-01 - 1989-04-01

   Vehicles Affected

   23935

3. Recall Description

   DETERIORATION OF THE REED VALVE SUBASSEMBLY MAY LEAD TO A MALFUNCTION WITHIN THE SECONDARY AIR SUPPLY PORTION OF THE EMISSION CONTROL SYSTEM. THE SCREWS WHICH ATTACH THE REEDS TO THE REED VALVE SUBASSEMBLY MAY RUST, AND IF THE RUSTING BECOMES SEVERE, THE SCREW HEADS WILL ERODE AND ALLOW THE REEDS TO SEPARATE FROM THE REED VALVE SUBASSEMBLY. CORROSION MAY ALSO OCCUR ON THE REED VALVE SUBASSEMBLY, DEFORMING THE REED SEATS AND PREVENTING THE REEDS FROM CLOSING PROPERLY. SEPARATION OF THE REEDS FROM THE REED VALVE SUBASSEMBLY OR IMPROPER CLOSING OF THE REEDS ALLOW HOT EXHAUST GASES TO FLOW BACKWARD INTO THE PLASTIC SECONDARY AIR FILTER CASE WHEN THE VEHICLE IS BEING DRIVEN. THESE HOT EXHAUST GASES MAY MELT THE SECONDARY PLASTIC AIR FILTER CASE.

   Possible Effects

   THE MELTING PLASTIC AIR FILTER CASE MAY LEAD TO A FIREIN THE ENGINE COMPARTMENT.

   Action

   REPLACE THE REED VALVE SUBASSEMBLY WITH ONE WHOSE METAL COMPONENTS ARE FABRICATED FROM CORROSION RESISTANT STAINLESS STEEL.

   Notes

   SYSTEM: EXHAUST SYSTEM.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: HYUNDAI MOTOR COMPANY WILL BE PERFORMING THIS RECALL FOR THE HYUNDAIEXCEL AND FOR THE MITSUBISHI PRECIS.

   Recall Manufacture Dates

   -

   Vehicles Affected

   895000