HowTune

Change The Engine Air Filter on a 2014-2017 Chevrolet Impala

This article is visible to only you.

Learn how to check and change the engine air filter on any 2014-2017 Chevrolet Impala. The job is quick (though not as easy as some cars). If you have a couple screw drivers and 10 minutes, you can easily change out the filter yourself.

The air filters for both the V6 and L4 engines are very similar, but do have different part numbers from GM. Some of the aftermarket filters say they fit both, but some do not. It's not real clear what the differences are, but I've broken the required parts list up based on the parts that I found.

Remove the Air Filter

1

Open the hood by pulling the hood release lever under the dash.

2

Locate the engine air intake.

3

Loosen the screws around the circumference of the intake.

4

Loosen the band clamp holding the intake lid to the intake tubing.

5

Remove the intake box lid.

Image 7355 from Change the Engine Air Filter on a 2014-2017 Chevrolet Impala
6

Remove and Replace the filter.

7

Install the intake box lid and tighten all the screws.

Image 7359 from Change the Engine Air Filter on a 2014-2017 Chevrolet Impala
8

Install the intake tubing and tighten the band clamp.

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.