HowTune

Mount The License Plate Holder on a 2015-up Ford Mustang

This article is visible to only you.

This is a guide that will show you how to mount the exclusively designed front tag license plate bracket for the 2015 and up Ford Mustang. This installation will not require drilling or any kind of modification. The front tag license plate bracket will be installed on the passenger side for a cool JDM offset look.

  • socket wrench
  • screwdriver
Image 7657 from Mount the License Plate Holder on a 2015-up Ford Mustang
1

Locate the two screws holding the under engine shield up to the Ford Mustang engine.

Image 7658 from Mount the License Plate Holder on a 2015-up Ford Mustang
2

Use a socket wrench to unscrew the bolts.

Image 7659 from Mount the License Plate Holder on a 2015-up Ford Mustang
Image 7660 from Mount the License Plate Holder on a 2015-up Ford Mustang
Image 7661 from Mount the License Plate Holder on a 2015-up Ford Mustang
3

Bolt the front tag license plate bracket onto your Ford Mustang's under engine shield. Replace the bolts with the included screws and washers. Be sure to slide the washers onto the screws before securing them onto the license mounting bracket.

Image 7664 from Mount the License Plate Holder on a 2015-up Ford Mustang
Image 7662 from Mount the License Plate Holder on a 2015-up Ford Mustang
Image 7663 from Mount the License Plate Holder on a 2015-up Ford Mustang
4

Secure your license plate onto the front license plate mount.

Image 7665 from Mount the License Plate Holder on a 2015-up Ford Mustang
Image 7666 from Mount the License Plate Holder on a 2015-up Ford Mustang

Your Ford Mustang now has a cool offset look for your license plate thanks to the exclusively designed license plate mounting bracket. If you have another car that you would like to have this offset look, explore our many license plate brackets to find one that best fits your car today!

There are 0 Comments.

Say Something.

Post Your Comment

Post Your Comment

Cancel

You have to log in to comment...

Register or

We'll publish your comment after you're logged in.